(0)

Двухвальный дисковый многопильный станок Белая Акула 2Ц16-350

Payback period

Performance

Price

Select a model:

Electrical:

2Ц16-250
2Ц16-300
2Ц16-350
2Ц16-400

Download instruction

Buy

1 000 000 rub.

Description
Specifications
Spare parts
Customer reviews

Disk multisaw machine "White Shark" 2C16-350

The package includes everything you need to get started:
- saw block;
- spacers for the required size of the finished lumber, placed on two shafts;
- machine passport and instructions for its use.
The cost of live rolls is - 25 000 rubles 3-meter section, for the installation of the machine 2 sections are required (feeding and receiving live rolls).

The cost of a set (20pcs) of NOOK 350x475x4x4,7 18 + 4 circular saws is RUB 110,000.

The cost of the grinding machine for Altai-z650 circular saws is RUB 20,000.

Benefits:
- High cutting speed
- The ideal geometry of the resulting lumber
- Possibility of cutting both one and two shafts
- Up to 10 saws on each shaft
- Hot Sales
The scheme of the machine:

Parameters	Value
Installed power, kW	63
Productivity at the exit, m3 / shift	from 25
Diameter of saws, mm	250
Diameter of a saw shaft, mm	75
The maximum number of saws in the post, pcs	2x10
Width of a post, mm	630
The maximum section of the gun carriage, mm	650х120
Minimum carriage length, mm	1500
Power of the main el. engine, kW	30, 37, 45
Saw rotation frequency, rpm	3000
Longitudinal drive, type	electromechanical
Power el. feed engine, kW	3
Speed of longitudinal movement, m / min step / smooth *	from 0 to 13.6 (up to 40 *)
Shipping Parameters:
- height, mm	1560
- width, mm	1300
- length, mm	1920
- total weight, kg	1790
- volume, m3	4
* The power of electric motors depends on the wishes of the buyer. The possibility of smooth adjustment of the feed rate is provided by the frequency converter - supplied as an option.

Parameters	Value
Installed power, kW	77
Inlet capacity, m3 / shift	from 30
Diameter of saws, mm	300
Diameter of a saw shaft, mm	75
The maximum number of saws in the post, pcs	2x10
Width of a post, mm	630
The maximum section of the gun carriage, mm	650х160
Minimum carriage length, mm	1500
Power of the main el. engine, kW	30, 37, 45
Saw rotation frequency, rpm	3000
Longitudinal drive, type	electromechanical
Power el. feed engine, kW	3
Speed of longitudinal movement, m / min step / smooth *	from 0 to 13.6 (up to 40 *)
Shipping Parameters:
- height, mm	1675
- width, mm	1290
- length, mm	2080
- total weight, kg	2100
- volume, m3	4
* The power of electric motors depends on the wishes of the buyer. The possibility of smooth adjustment of the feed rate is provided by the frequency converter - supplied as an option.

Parameters	Value
Installed power, kW	93
Inlet capacity, m3 / shift	from 50
Diameter of saws, mm	350
Diameter of a saw shaft, mm	75
The maximum number of saws in the post, pcs	2x10
Width of a post, mm	630
The maximum section of the gun carriage, mm	650х210
Minimum carriage length, mm	1500
Power of the main el. engine, kW	30, 37, 45
Saw rotation frequency, rpm	3000
Longitudinal drive, type	electromechanical
Power el. feed engine, kW	3
Speed of longitudinal movement, m / min step / smooth*	from 0 to 13.6 (UP to 40 *)
Shipping Parameters:
- height, mm	1675
- width, mm	1290
- length, mm	2080
- total weight, kg	2215
- volume, m3	4
* The power of electric motors depends on the wishes of the buyer. The possibility of smooth adjustment of the feed rate is provided by the frequency converter - supplied as an option.

Parameters	Value
Installed power, kW	113
Inlet capacity, m3 / shift	from 70
Diameter of saws, mm	400
Diameter of a saw shaft, mm	75
The maximum number of saws in the post, pcs	2x10
Width of a post, mm	630
The maximum section of the gun carriage, mm	650х240
Minimum carriage length, mm	1500
Power of the main el. engine, kW	55, 75*
Saw rotation frequency, rpm	3000
Longitudinal drive, type	electromechanical
Power el. feed engine, kW	3
Speed of longitudinal movement, m / min step / smooth*	from 0 to 13.6 (up to 40 *)
Shipping Parameters:
- height, mm	1675
- width, mm	1290
- length, mm	2080
- total weight, kg	2395
- volume, m3	4
* The power of electric motors depends on the wishes of the buyer. The possibility of smooth adjustment of the feed rate is provided by the frequency converter - supplied as an option.

Name of the piece	price, RUB.
Sprocket block 21 tooth	1000
Sprocket assembly	1650
Chain tensioner	1100
Nail Claw Bolt	300
Gearbox shaft 90x50mm	550
Spindle shaft	22000
Spindle shaft assembly	33000
Grouse screw assembly	5720
Nut M72	440
Sprocket 16 teeth	220
Sprocket sprocket	770
Sprocket with shaft on gear	2200
Sprocket assembly for gear	770
Saw key for tightening	5500
Top nail protection	10000
Nail protection lower	10000
Set of sprockets, gears and chains	19140
Set of sprockets and gears	14410
Spindle shaft counter cover	11000
Feed motor plate	3300
Chain tensioner roller	600
The grouse is driving	14300
Wheel hub with sprocket kit	836
Driving pulley 5 streams	5500
Gear Pulley	1650

�

Дмитрий Перерядов более 3 лет назад

★★★★★Recommend
Hide
Приобрели, 2х вальный многопил в апреле 2021 года, станок доставили транспортной, с настройкой никаких проблем не возникло т.к. наши парни, сразу посмотрели видео, которое идет в комплекте со станком на флешке. Станок работает нормально, минусов пока не замечено.

Advantages: Легко настроить и установить

Disadvantages: Не выявил

1

1

�

Александр более 3 лет назад

★★★★★Recommend
Hide
Отличный станок, очень быстро себя окупил!

Advantages: Неприхотливый, простой

Disadvantages: Не выявлено!

1

0

�

Евгений Малахов более 3 лет назад

★★★★★Recommend
Hide
Хороший станок, своих денег стоит. Распиливаем в смену около 80 кубов лафета на нем на обрезную доску и брус. Из нюансов: станку необходимо жесткое основание, желательно навес, что бы от осадков ничего не ржавело. Если пилите при отрицательных температурах от -10 и ниже, необходимо заменить масло в редукторе на подачу на синтетику т.е. на более жидкое, в инструкции про это ни слова! В целом аппарат хороший.

1

0

�

Игорь более 3 лет назад

★★★★★Recommend
Hide
Станок в составе линии: Брусовал, этот станок + кромкорез КС1000 работает уже четвертый год, нареканий нет, вообще. Благодарим завод изготовитель за качественные станки!

2

1

�

Андрей более 3 лет назад

★★★★★Recommend
Hide
Отличный станок, работает уже 2 с лишним года, за время эксплуатации были 2 раза заменены ремни и смазывались подшипники, естественно, каждые полсмены чистка рябух железной счеткой. Ничего не ломалось! Пашет как танк, вгрызаясь в лафет как Акула!

2

0

To add a review you need to log in!

Двухвальный дисковый многопильный станок Белая Акула 2Ц16-350

Fill out the form and we will we will call you back

Get 20 examples our work to the mail

Free calculation cost

Altaylestehmash LLC policy regarding the processing of personal data

Fill out the form and we will
we will call you back

Get 20 examples
our work to the mail

Free calculation
cost