Single-shaft multi-saw machine "White Shark" 1C8-450
Single-shaft multi-saw machine, designed for sawing two-edged timber (carriage) into boards and timber, as well as for sawing boards into bars, for cutting edges on unedged boards.
The package includes everything you need to get started:
The cost of live rolls is - 25 000 rubles 3-meter section, for the installation of the machine 2 sections are required (feeding and receiving live rolls).
The cost of a set (10pcs) of NOOK 350x475x4x4,7 + 18,7 + 4 saws is 55,000 rubles.
The cost of the grinding machine for Altai-z650 circular saws is 20,000 rubles.
Benefits:
The scheme of the machine:
Parameters |
Value |
||
Installed power, kW |
58 | ||
Productivity at the exit, m3 / shift |
from 30 | ||
Diameter of saws, mm |
450 | ||
Diameter of a saw shaft, mm |
75 | ||
The maximum number of saws in the post, pcs |
8(10*) | ||
Width of a post, mm |
630 | ||
The maximum section of the gun carriage, mm |
650х155 | ||
Minimum carriage length, mm |
1000 | ||
Power of the main el. engine, kW |
55 | ||
Saw rotation frequency, rpm |
3000 | ||
Longitudinal drive, type |
electromechanical |
||
Power el. feed engine, kW |
3 | ||
Speed of longitudinal movement, m / min step / smooth * |
from 5.6 to 19.6 |
||
Shipping Parameters: |
|||
- height, mm | 1675 | ||
- width, mm | 1290 | ||
- длина, мм | 2080 | ||
- length, mm | 2215 | ||
- volume, m3 | 4 | ||
* The power of electric motors depends on the wishes of the buyer. The possibility of smooth adjustment of the feed rate is provided by the frequency converter - supplied as an option. |
Name of the piece | price, RUB. | ||
Block of sprockets, chains and gears assembly | 19140 | ||
Spindle shaft assembly |
33000 | ||
Drive pulley (7 streams) |
9350 | ||
Gear Pulley |
2255 |
Recommended products