Multi-saw power saw bench Altai-M450
Multi-saw machine Altai M450 designed for longitudinal sawing carriages or beams on edged boards. The thickness of the resulting board from 12mm. Due to the thin cut, about 2.7 mm, the machine is effective when sawing into planks and thin boards.
Benefits:
Altai M450 is characterized by a quick payback period due to:
Multi-saw machine Altai M450 can be mounted without a special foundation and installed on a flat, solid surface (for example on a concrete slab).
For maximum productivity, the feed drive is equipped with a frequency converter, which allows you to smoothly adjust the feed speed to the optimum, according to the ammeter of the load of the main motor. However, it is possible to work with the frequency converter switched off i.e. with a constant feed rate.
For sawing a short gauge, the feed roller is equipped with a centering trolley.
Contents of delivery:
Sharpening device"Altai-zrp30" for saws of a frame saw as required, purchased separately. Grinding device cost RUB 25000
Схема работы:
Parameters | Value | ||
Electric motor power, kW | 15 | ||
Carriage dimensions, mm - width - height |
up to 460 up to 250 |
||
Number of delivered saws, pcs. | up to 19 | ||
The thickness of the resulting board, mm | from 12 | ||
Workpiece feed rate, m / min (stepless) |
from 0.4 to 2 | ||
Supply voltage (current type), V | 380 (3-phase) | ||
Sizes of a saw, mm - length - width - thickness - cut thickness |
666 73 1,1...1,4 2,7 |
||
Overall dimensions (LxBxH), mm - saw block - live rolls |
2500х1200х2200 3500х900х1200 |
||
Weight, kg | 1800 | ||
Productivity, m3 / shift |
up to 8 |
Recommended products